What are the factors of Snake Plant Pups? One of the main questions that always arise in the minds of snake plant lovers is how to increase the new shoots of this plant or speed up its growth!? It should be said that there is no definitive solution in this field, but there are ways that, in addition to maintaining the health of the plant, can cause the snake plant to grow new shoots. Stay with us in this article to learn these simple but practical ways.
The most important question that has come to you is, why does the snake plant not grow new shoots? In response, various factors can be involved in the growth and growth of this plant. You must first provide suitable conditions for the plant and respond positively to its needs so that it will gradually make you happy and start growing new shoots.
it is recommend to read these article about watering snake plant and snake plant light to get the gist of keeping snake plant at home.
Stay with me in the rest of this article to tell you 6 main points that will make your snake plants crawl.
How much can a snake plant grow?
Before taking any action, you should know that the snake plant is generally a slow-growing plant, but it can grow up to 60 Inch over the years. Snake plant like moderate indoor light and continues to grow there slowly. Sunlight, boosters and ideal maintenance conditions all have an important effect on snake plant growth, but its final size is actually very dependent on the type of snake plant you have and its initial size. There are species of snake plants, such as the Sansevieria Trifasciata hahnii, Croatian snake plant, etc., whose leaves grow very low, and you cannot expect a height of 1 meter from them.
Why is the Snake Plant Pups important?!
One of the best experiences for those who take care of plants is to see their fresh leaves or small shoots. Many plants show themselves with new leaves, and others, like the snake plant, reproduce and produce tiny fellows from their side.
These small new shoots (snake plant new shoot) can be the fastest and best way to propagate plants, and their propagation is very important for gardeners or growers of indoor plants. You may say that leaf-cutting is also suitable for the propagation of snake plants, but the only way to preserve the yellow stripes on the leaves of a snake plant is through new shoots. In addition to reproduction, the growth of new shoots from a plant is a sign of its health and proper maintenance conditions.
Snake plant care requirements
This plant is placed in the group of resistant plants, which is resistant to both lack of water and low light, and it can only grow in these conditions, but you should not expect great growth from it. So it would be best if you provide best condition for snake plant care; for example provide good but filtered light for this plant, moderate watering (check the soil and water it whenever the soil dries to a depth of 1inch), and Rich soil with high drainage (snake plant soil can be a little heavy). The best temperature for keeping this plant is 64-78 degrees Fahrenheit. If you provide suitable conditions for this plant, it can grow up to 58 to 62 inch tall and grow new shoots.
In a separate article, we have thoroughly explained snake plants light.
What are the factors of getting snake plant pups?
There are 6 main reasons for growing or not growing new shoots in snake plants, such as light, temperature, irrigation, pot, pest, and nutrition, all of which depend on your maintenance conditions, so let’s check it case by case:
1 Snake plant new shoots needs proper light
Provide proper lighting for your Snake plant. The characteristics of the light should be such that it is neither too intense nor too little; too much light and too little light can be the main obstacle for your snake plant not to bloom. If the light is low, the plant will grow little, and the color of the leaves will turn green, and if the light is high and direct, especially in the summer (if it is exposed to direct sunlight), it will prevent the growth of the plant, so what kind of light is suitable for snake plant? You provide the plant with a lot of light but filtered.
This plant should receive at least 6 hours of filtered light daily to grow well. The best place to keep it is behind a frosted or curtained window; if you live in an apartment and don’t have good light, you can use grow lamps.
2 Improper watering prevents the Snake Plant Pups
This plant is resistant to low watering and does not like high watering at all, and if the watering is high, the plant will eventually wither. Also, excessive watering causes fungal diseases in the plant; if you do the watering correctly and on time, the plant will grow well. Checking the soil and watering it whenever it is dry is better.
Do the irrigation in such a way that the plant is completely watered and the excess water comes out from under the pot. At the same time, check the drainage every month because the water accumulation under the pot will cause the roots to rot and, ultimately, the death of the plant. We discussed snake plant watering and its critical points in a complete article that you must read.
3 The plant size should be proportional to the pot size
Choosing the right pot for the plant is very important in the new shoots growth in the snake plant and all indoor plants. The snake plant grows roots first, and when the pot is full of roots, it starts growing shoots. So it is very important to choose a suitable pot for the plant.
also check out this article about snake plant root rot
4 Temperature and its effect on Snake Plant Pups
If the temperature of the storage place is higher than 25 or below 18 degrees Celsius, the possibility of causing a boil will decrease. This plant can withstand temperatures up to 30 degrees Celsius, but you must provide adequate watering and humidity. Also, you should not allow the temperature of the storage place to fall below 10 degrees Celsius because the plant will die if it stays at this temperature for a long time.
5 Use of high phosphorus fertilizers
As we said in the previous section, after the root growth, the plants start growing the stem and new shoots; when you feed the plant with high phosphorus fertilizers, you increase the root growth, which helps the plant to grow new shoots faster. You can use NPK fertilizers (Krystalon fertilizer) with high phosphorus.
6 Your plant should not be sick
All houseplants waste all their power and energy to solve and fight the problem when they get sick or have a problem. So, as a result, they don’t think about catching up. (Can a person struggling with a severe illness think about having children?) So try to eliminate the disease as soon as possible and provide suitable conditions for the plant to grow well.
when to separate snake plant pups ?
Snake plant pups can be separated from the mother plant when they are a few inches tall and have developed their root system. This typically happens when the pups are about one-third the size of the mother plant or have grown to around 3-4 inches tall.
To separate the pups, gently remove them from the soil and carefully untangle their roots from the mother plant’s root system. You may need a clean, sharp knife to cut through any stubborn roots. Once the pups are separated, plant them in their pots with fresh potting soil and water thoroughly.
It’s important to note that snake plants are resilient and can tolerate a range of conditions, so separating the pups can be done at any time of year. However, the best time to separate them is in the spring or summer when the plant is actively growing and has the best chance of establishing itself in a new pot.
how to separate snake plant pups ?
Separating snake plant pups is not a difficult task. Just follow the steps below, and there will be no problem for the mother plant and the pups.
- Water the mother plant the day before you want to separate the pups. This will reduce the possible damage to the plant.
- Carefully remove the plant from the pot and gently loosen the soil around its roots to expose the roots.
- Look for pups that have their own roots. These are the ones you can separate from the mother plant.
- Using a clean, sharp knife or scissors, separate the pup from the mother plant. Make sure to cut off any roots connecting the two plants.
- Gently remove the excess soil from the root of the pup.
- Plant the pup in a new, small pot with fresh, well-drained soil. Ensure that the soil is firmly packed around the roots to hold the plant in place.
- Water the newly separated pup in a bright place with indirect light.
You can also write us about your experience with snake plant new shoots. And if you have any questions or problems, ask in the comment section.