In this article, we will teach you A and Z of How to propagate Schefflera; maybe you are one of those who are very interested in propagating houseplants because, with this, they can easily increase the number of beautiful flowers in the house. Schefflera is one of the houseplants that are very popular among plant lovers. For this reason, the propagation of Schefflera and knowing the tips related to the propagation of Schefflera can be very useful. This article from the thehplants team is dedicated to the propagation of Schefflera. You can follow the propagation of Schefflera step by step with us. You will also learn about the different methods of propagation of Schefflera. but before getting started make sure to check Schefflera care article. Read this article to the end.
Schefflera propagation methods
To propagate Schefflera, you must first know all the propagation methods and then choose one of Schefflera’s methods according to the existing conditions and your plant. You can propagate Schefflera by stem or leaf (we will explain whether it is a suitable option), and it is possible to propagate Schefflera by cuttings or layering. In the rest of this article, we will introduce the shuffler reproduction methods and explain each separately.
Schefflera cuttings (using stem cuttings)
Propagating Schefflera with this method is one of the easiest ways to propagate; you can use the following steps to propagate Schefflera in this way.
First, you need to choose a healthy branch to propagate the Schefflera, and using the wooden part to propagate the Schefflera with this method is better.
Using a sharp, sterilized knife or scissors, cut 3 inch (8 to 10 cm) long cuttings from the plant and also remove the terminal leaves from the plant. Separating the leaves helps the plant to focus on rooting and wastes less energy during the propagation of the Schefflera. It is enough to leave at least 2-3 leaves on the cutting. It is better to use a clean and disinfected device to propagate Schefflera. Note that Schefflera toxic so make sure to wear gloves.
You can soak the cuttings in rooting hormone or cinnamon powder to increase the percentage of success in rooting the ends or place the cut cuttings in an environment with a suitable temperature and low light for 24 hours to seal the cut place.
Prepare the right soil for the propagation of Schefflera. The suitable soil for cuttings is a mixture of perlite and peat moss or cocopeat, and you can use pots with a diameter of 2 to 3 inch (6 to 9 cm) to plant the cuttings. The pot’s soil should be moist, but do not let it get too wet because the plant will rot.
Planting Schefflera cuttings in pots
You can also use water or perlite to root the cuttings, which we will explain below.
Remember that the flower pot you choose must have drainage and be the right size. For better umbrella plant propagation, set the ambient temperature to 68 to 77 degree Fahrenheit (20 to 25 degrees Celsius) and place the plant in a place away from direct light.
Schefflera rooting in water
We will redo all the steps explained above to propagate Schefflera with this method. In the first step, choose a healthy stem and separate it from the mother plant with a clean tool.
After cutting the Schefflera, to propagate the Schefflera by water, just put the separated plant in a container of water and change the water in the container once in a while.
As mentioned in other sections, observe the appropriate environmental conditions, such as light, temperature, etc. After the plant takes root in the water, you can transfer the propagated Schefflera plant to a suitable flowerpot. (Always use water suitable for the plant, boiled water that has been cooled can be a good option for the plant, or if you do not use boiled water, it is better to leave the water overnight so that the chlorine in the water is destroyed and the temperature of the water is balanced)
Propagation of Schefflera by stem layering method
To propagate the plant this way, select a part of the stem and pour the appropriate soil on the stem. The soil and plant should be kept moist. Wait 6 to 8 weeks for the stem to take root under the soil. To propagate Schefflera this way, you should notice that the selected stem does not break. You can also use a stone or other heavy object to hold the stem.
After the plant takes root, you can separate the stem from the main plant and plant it in another pot. To read more, refer to the article on reproduction by sleeping method.
Propagation of Schefflera through seed planting
In the first step, you must provide a suitable tray and soil for the umbrella plant propagation.
Plant the seeds inside the tray. Remember that the seeds should not be planted too close to each other because it will be a problem when the plant grows.
watering of the tray should be done carefully, and overwatering should be avoided.
After the plant grows to 1 inch (2 to 4 cm), you can transfer the plant to the flowerpot. In transferring the plant, you should be careful that the roots are least damaged and not too much exposure to the air.
Did you know that Schefflera Bloom?
Propagation of Schefflera through leaves
To reproduce Schefflera with leaves, it is better to put it in a clean glass container through which the light passes and pour cooled boiled water.
Put cellophane or foil in your container and make a hole so that the end of the leaf passes through the cellophane or foil. Put the end of the leaf in the water and wait until the root formation is done.
After the plant has taken root enough, you can transfer it to a new flowerpot to complete the propagation of your Schefflera. Remember to change the plant’s water every once in a while, to avoid getting into trouble.
A very important point in the reproduction of Schefflera leaves: as you have seen above, all the leaves must have at least 1 inch (3-4 cm) stems to become a complete plant after rooting. Otherwise, experience has shown that these leaves will never sprout after rooting.
Schefflera propagation steps in water for all types of cuttings
The umbrella plant propagation method is very popular, especially in water, because it gives you a new plant quickly and easily. It doesn’t matter whether your cuttings are leaves or stems and branches; In any case, you must go through the following steps to reproduce the Schefflera plant in water.
- First, separate a cutting from the organ you want, which you are sure is completely healthy, from the mother plant.
- The length and width of your chosen cutting should be the size of a pencil.
- After separating the cutting, put it in a blue container according to size.
- Place the water container of the cutting in an environment with indirect light whose temperature range is between 68 and 86 degree Fahrenheit (20 and 30 degrees Celsius).
- After a few weeks, you will see that the cuttings in the water have taken root.
- After observing the rooting of the cuttings, you should plant them in a pot with proper drainage.
- It is better to choose the soil for growing cuttings from a mixture of cocopeat and sand and disinfect this soil before use.
check the reasons for Schefflera dropping leaves
Necessary care of Schefflera cuttings in water
- Be sure to expose the Schefflera cuttings in water to soft and indirect sunlight.
- Schefflera cuttings should be kept in water without chlorine and salts, such as cold and purified boiled water, to keep them healthy.
- Whenever the water in the cutting container becomes cloudy or contaminated, change it immediately.
- The humidity of the Schefflera cuttings storage environment should not be less than 50%.
5 important points for Schefflera propagation:
The best time for cuttings and propagation of Schefflera is during the growing seasons of the plant, i.e., spring or summer. You can also use rooting hormones to grow more and better cuttings during Schefflera propagation.
After separating the plant from the mother plant, you can also use fungicide so that the plant is covered with fungicide; this will prevent the occurrence of fungal disease in Schefflera, but if the fungicide is used in large amounts, it may harm the plant.
After transferring the plant to a new flower bed, you can use humic acid and amino acids to reduce the new plant’s stress level and strengthen the plant.
You can use plastic with holes to keep moisture during the umbrella plant propagation. Choose a plastic with the right dimensions, make some holes in it, and place it on the plant so that the moisture of the plant is kept. This method is used in the propagation of Schefflera by cuttings.
Schefflera propagation problems
Like any other plant, this plant can suffer from common houseplant disease and fall, and the cause of the disease must be identified in the first step, and then the treatment of the plant should be started. To learn about these problems in Schefflera, you can read the article about Schefflera’s disease. When propagating Schefflera, you must choose a healthy part of the plant so that the new plant does not have any problems. However, in many cases, during the propagation of Schefflera, the cut plant will turn yellow or rot.
This Schefflera yellow leaves or the loss of the plant during the propagation of Schefflera can be due to fungal diseases for which the use of fungicides can be very effective.
Likewise, if you transfer the plant to the flowerpot when it has not yet rooted well or has few roots, the percentage of the plant’s destruction will be very high; Therefore, the rooting rate of the plant must be good so that we have a strong and healthy plant after Schefflera propagation.
in umbrella plant propagation, you must pay attention to the light and temperature of the environment because direct light can destroy the plant, and unfavorable temperatures can also damage the plant.
Introducing care conditions and propagation methods of Schefflera
Before discussing Schefflera’s propagation, we should briefly mention a few points about how to keep this plant. The light of this plant should be indirect, and the amount of light it needs is almost medium or high, so you must provide good light for this plant. Remember that direct light causes burns in the plant. The ideal temperature of Schefflera is 18-27 degrees Celsius. After the propagation of Schefflera, you must provide the right temperature for the plant.
Schefflera plant
Regarding watering the plant, you should pay attention to watering the plant after the soil dries. This plant needs a lot of dusting, so don’t forget to spray it twice a week, whether in summer or winter; otherwise, it is better to put some pebbles in the Schefflera pot and make an island for it.
By making an island or by spraying, the desired humidity of the plant is provided. In addition to the above points, you must also provide other care conditions for the plant, such as suitable soil and fertilization, etc…to get more information in this field, it is better to refer to the Schefflera care article and this article completely. Remember that after the propagation of Schefflera, you must provide the mentioned environmental conditions for the new plant so that it does not die. This plant is one of the resistant houseplants that are easy to keep.
Last word on umbrella plant propagation
Like any other plant, the Propagation of Schefflera has its tips, which will keep the plant healthy and fresh by following the relevant tips. According to your existing conditions, you can choose one of the different propagation methods of Schefflera and do umbrella plant propagation. If you have any experience with Schefflera propagation, you can share it with us, or if you have any questions, you can ask in the comments.
Thanks for the good tutorial on Schefflera propagation