Have you ever thought about how important choosing a pot for a snake plant is? When it comes to caring for your Snake plant, the pot you choose could either make or break the situation. The health, growth, and general wellbeing of your snake plant may be effected when you choose a pot for a snake plant. However, how can you choose the best one? How can you make sure your snake plant not only survives, but also thrives? We will go deeply into the art of choosing the best snake plant pot in this extensive tutorial. Prepare to learn all the vital hints, insider information, and pot-perfecting techniques.
You will possess the knowledge necessary to ensure the success of your snake plant once you have finished reading. For an integrated approach to caring for this amazing plant, don’t forget to read our educational post on snake plant care. Here is where your road to become an expert in snake plants begins.
what is the best pots for snake plants?
The snake plant is one of the most popular houseplants; you can easily find it in every office or building. It has beautiful and sword-like leaves that are mostly green, and some of the varieties feature a yellow border named Sansevieria trifasciata. Snake plants (Sansevieria) are also known as mother-in-law’s tongue, perhaps because of their unique shape.
I should add that snake plants are diehard and nearly indestructible. They need little watering and caring. In addition to being beautiful and pleasing to the eye, they purify the air in their environment; therefore, they are a perfect choice for your house or workplace. The best pot for snake plants is the one that has proper drainage that can drain water quickly; because too much moisture can lead to snake plant root rot.
How to know if your snake plant needs a new pot?
Sansevieria does not need frequent repotting and thrives better and creates more pups in the small pots. But sometimes your plant stops growing, or roots come out of the drainage hole; these signs show that it is time to repot your snake plant, and you should Choose Snake Plant Pot that is bigger than the previous one. When the snake plant has green and fresh leaves, it indicates that the pot, soil and waring are good, and your plant has been fed ideally with fertilizers. But when the tip of the leaves starts getting yellow and they become soft and mushy, it means that your snake plant is dying, and you should take care of it as soon as possible. Always repot snake plant when it is in a good and healthy condition and never change a diseased plant’s pot unless it has root rot.
Also, when watering snake plants, the excess water must come out of the pot. Otherwise, you should double check the drainage system or choose a suitable pot for the snake plant.
Crucial points on choosing a pot for a snake plant
When choosing a pot for a snake plant, you should consider some points such as size, drainage, material etc., and we will examine all of them.
Does drainage have an impact on choosing a pot for a snake plant?
Absolutely. The drainage system is one of the pivotal points in choosing a new pot. The pot that you want to purchase should be well-drained that could easily let the water pass through it. The new pot should have a few drainages hole. The more holes it has, the better it will let the water pass. Mote that it is better to put some gravel on its bottom to increase the drainage level.
Does the size matter on choosing a pot for a snake plant?
Yes, it does matter. Sansevieria prefer the right size and even a bit smaller pot. In this situation, it will create more pups. So, if you want to choose a new pot, it should be one size (2 inches) bigger than the previous one. While repotting, use fertilizers high in phosphorus that will increase root growth and, therefore, leaf growth.
What is the Best Pot Material for snake plants?
Make an informed decision regarding the material of the snake plant pot when placing it near a window because the sun’s strong rays could potentially destroy its sensitive roots. Metal pots should be avoided since they might conduct heat and increase the risk of root damage. Choose pots made of materials like clay, terracotta, ceramic, or plastic as an alternative.
Particularly among these choices, clay and ceramic pots provide clear benefits for the health of your snake plant. These containers offer a solid, permeable atmosphere that can aid in preserving the ideal moisture levels required for snake plants. Clay and ceramics’ flexibility enables improved aeration and moisture control, reducing overwatering and root rot. Clay and ceramic pots are favored by many snake plant fans since they not only ensure the health of your snake plant but also make it easier to maintain it flourishing in a sunny place.
Is it advisable to use a self-watering pot for snake plants, and how does it work?
Self-watering containers are useful as a snake plant pot because they maintain constant soil moisture and lower the chance of overwatering, which is crucial for snake plants that are prone to root rot. These containers work by including a water reservoir and a capillary wick, which draws water into the soil as needed to maintain an even moisture level. It’s essential to pick a pot that is the right size, utilize soil that drains effectively, and check the water reservoir frequently. Although self-watering containers make it easier to maintain the ideal moisture levels, they do not change the snake plant’s need for light, thus picking the ideal location is still crucial for the health of the plant as a whole.
Size of the plant and proper choice of pot
Snake plants have different varieties, and you should choose the perfect pot by the variety of the snake plant. For Sansevieria hahnii never use a big and cylindrical pot (Minimum depth of 5 to 7 inches). Sansevieria ‘Laurentii’ is at least 7 to 10 inches, and snake plant black coral’s pot shouldn’t be more than 15 inches. If you intend to use a cylindrical pot, put a plastic pot at the bottom of its r fill one-third of it with sand. In the following, we will explain further in this regard.
Are the tall (cylindrical) pots suitable for snake plants?
You can use pots with different Height, but remember that tall pots need more soil, and when watering snake plants, you should check the soil depth and start watering. Otherwise, your snake plant with face root rot. To overcome this problem, create a few holes on the bottom of the pot, fill it with gravel, use an upside-down pot, and fill the rest with soil, then plant your Sansevieria.
Before choosing a pot for snake plant, check the soil.
The plant you want to report must be healthy; it should be without yellow leaves, pests and diseases and have bright green leaves because only healthy plants can accept the new pot and adapt to the new conditions. As a result, if you notice any disease while repotting. First, seek to cure it, then repot it.
Use well-drained soil for repotting.
In general, the perfect soil is the one that does not keep excess moisture. Proper soil is a mixture of garden soil + cactus soil. You can use a mixture of perlite+ Pete Moss + Coco Pit and add some garden soil.
How to repot a snake plant?
To start, take the plant out of its current pot: Place your hand on the bottom of the leaves where the plant meets the soil, turn the pot upside down and gently pull the plant out of the pot. Please make sure not to pull the plant out of the pot by strong shaking because it may cause the leaves to separate from the root, and the plant will die. An important point: Never remove the soil around the root because it will cause some severe damage to the root.
In the last step of changing the snake plant root, take out the plant and transfer it to the new pot.
In the last step of changing the snake plant root, take out the plant and transfer it to the new pot. For transferring the snake plant to a new pot, put some small stones on the drainage hole so that the soil does not come out of the pot while watering, and excess water comes out of the pot easily. Then start pouring the soil inside the pot to the extent that when you put the plant, the end of its main stem is outside the pot. Now put the plant in the middle of the pot and pour enough soil so that the plant stays completely vertical in the pot and does not move. Finally, water it fully and move the plant to the place where you used to keep it or move it to a new place that meets snake plants’ needs.
Are there any specific recommendations for choosing a pot for a snake plant varieties?
Indeed, the specific growth patterns, sizes, and environmental preferences of various snake plant kinds might affect the snake plant pot size that is best for them. Understanding the characteristics of snake plants, which are members of the Sansevieria genus and exist in a variety of sizes and forms, will help you make better potting decisions. One of the most popular snake plant kinds, Sansevieria trifasciata, has upward-pointing, sword-like leaves and often grows best in smaller pots since it grows vertically. Sansevieria cylindrica, on the other hand, favors broader pots to fit its particular growth pattern and is distinguished by its cylindrical leaves. Your decision regarding pot size and form can be influenced by knowing these distinctions.
Additionally, when choosing a pot for a snake plant, it is important to take into account the unique growing requirements of each type of snake plant. For a well-balanced plant structure and to prevent excessive root growth, some cultivars may need a more compact pot. Some plants may flourish in larger containers with greater room for root growth. By paying attention to the growth patterns and requirements of various snake plant species, you can easily nurture thriving snake plants by making sure that the pots you choose offer the right amount of room and support for healthy growth.
Why is snake plants leave turn yellow?
Snake plant leaves yellowing is partly or entirely due to environmental factors. Sansevieria is native to warm and tropical regions. Therefore, low temperatures and freezing can destroy its leaves. This happens inside and outside the house. The plant will suffer a temperature shock if it is near a cooling device or next to a window with a cold wind. Water is another critical factor. Lack of water will dehydrate the plant and lead to yellow leaves. Noteworthy leaves turning yellow due to water shortage start from the tip of the leaves.
On the other hand, overwatering will cause root rot; in this situation, the root will experience a fungal infestation, gradually succumbing to your snake plant. In this case, the yellowing of the leaves is one of the first signs of this problem. This is one of the main and most common reasons for sansevieria’s death. Generally, to prevent snake plant leaves yellowing from improper watering, you should water the plant correctly; So, during the growing season, water your Sansevieria only when the soil is completely dry to the touch. During winter, water snake plants once a month.
Do we have to water our plant after repotting?
In the case of snake plants, you’d better wait for a while. After repotting, you should give your plant some time to settle in the new soil and adapt to the new pot. So, you don’t need to water it immediately. The best situation is to resume watering the plant after one to two days of repotting. Don’t forget that snake plants are very sensitive to overwatering. They will be susceptible to fungal disease if they get flooded in water. Moreover, it will lead to root rot. As a result, after the first watering of the plant in the new pot, let the soil dry completely and then water the plant.
In this article, we intend to inform you of the points about choosing a pot for a snake plant and how to repot a snake plant. Let us know if you have any comments or experience about choosing a pot for Sansevieria or its repotting .